| Product ID | XEB0003K.A |
| Motor | 24V 250W Brushless |
| Power | 250W |
| Controller | Rated voltage: DC 24V
Low Voltage Protection: DC 20.5V (±0.5V)
Rated Curre |
| Battery | 24V / 9Ah removable Li-ion battery pack (Aluminium Alloy Casing)
Power ON/OFF switch enabled
Japanese Li-ion cell
Complete with Battery Protection Circuit |
| Charger | Input Voltage: AC 100V ~ 240V
Input Frequency: 47Hz ~ 63Hz
Output Voltage: DC 29.4V
Output Current: 1.7A (50W)
|
| Frame | Strong Aluminum Alloy for 26" Size |
| Style | Right Hand for Front Wheel, Left Hand for Rear Wheel (UK Style) |
| Brakes | Front & rear aluminium alloy V-brakes |
| Weight | Bike - 44lbs, Battery - 5.3lbs |
| Climb Grade | 7 degree |
| Wheelbase | 1188mm |
| Tyres | CST General Style Long Life 26" x 1 3/8" |
| Rim | Double wall Aluminium alloy CNC sidewall |
| Spokes | Aluminium alloy |
| Shifter | Shimano Thumb Shifter SL-TX50-6-Right |
| Derailleur | Shimano Tourney RD-TX30 6-Speed rear derailleur |
| Freewheel | Shimano MF-TZ06 6-speed 14-28T |
| Front Fork | Suspension Zoom front fork with alloy crown |
| Handlebar | Aluminium alloy |
| Chainguard | Painted iron |
| Mudguard | Polycarbonate |
| Chainwheel | 48T Aluminium alloy chainring and crank |
| Chain | Rust resistant chain |
| Bottom Bracket Parts | Cartridge type |
| Kickstand | Aluminium alloy rear kickstand |
| Rear Carrier | Aluminium alloy |
| Saddle | CIONLLI Cruiser saddle |
| Seat Post | Ø27.2mm Aluminium alloy |
| Lighting | Cycle force 6V generator bicycle light set: red rear reflector, white spoke reflectors.
|
| Tread | 17-18KM/H |
| Speed | 25kph (15mph) |
| Mileage | 25 - 35 mile |
| Torque | 10.5NM |
| Size | 1850Lx580Wx1150H(mm) |
| Note | P.S.
It is the responsibility of e-Bike riders to make sure that the e-bike is in good operating condition and is equipped with all legally required safety accessories before use. Do not operate the e-bike if you suspect there is a mechanical or electrical defect as any such defect could cause serious and even fatal accidents. |
